
Servo Controlled L.T. Automatic Voltage Controller (Stabilizer) |
Servo Controlled H.T. Automatic Voltage Controller (Stabilizer) |
HT Transformer with Built-in Voltage Stablizer |
Rectifier Equipments |
Ultra Isolation Transformer |
Special Purpose Transformer
SERVO CONTROLLED L.T. AUTOMATIC VOLTAGE CONTROLLER (STABILIZER)
Introduction :: Description :: Who Needs a Stabilizer :: Payback Period :: Benefits : Application :: Comparision :: Advantages :: Quantitative Advantages :: Technical Specifications :: Suggestions for Industrial units having OLTC
WHO NEEDS A STABILIZER
The industrial units having acute /high failure rate of Electrical Equipments such as bulbs,tubes,chokes,starters,contactor coils & motors (particularly smaller capacity motors upto 7.5 H.P.) etc. should verify that it may be due to HIGHER VOLTAGE. You may note down hourly readings of voltage variation for few days. If you find that input voltage is above 230 volts single phase / 400 volts three phase even for few hours a day, then you definitely require a stabilizer.

PAYBACK PERIOD
Owing to its high efficiency and associated benefits, the payback period for the cost of GLOBE Servo Stabilizer is from 6-12 months depending upon the input voltage variation and number of working hours of the plant, The HIGHER the input voltage the SHORTER will be payback period.
BENEFITS OF INSTALLING AUTOMATIC VOLTAGE CONTROLLER ON LIGHTING LOAD
By maintaining 365-380 / 210-220 volts, Three / Single phase output through Automatic Voltage Controller for Lighting Load, there will be definite saving of power bill & reduction in failure rate of lighting equipments. Higher the input voltage - more wil be the savings. The overall effect on the brightness of the lamp at 210 / 220 volts will be negligible.
APPLICATION
Through stabilizer are useful for any kind of application, these are most suitable for 24 hour continuous process plants where breakdown due to fluctuation results in heavy financial losses. These include :

<<Previous Next >>
Our all equipments are guranteed for Five Years against any manufacturing defect/faulty workmanship from the date of supply we shall not charge any thing for the visit and spare parts during the gurantee period.
Installation and commissioning of our equipment will be done under the supervision of our service engineers free of cost.
Free routine checkup from time to time by our experienced technical person to ensure the customers satisfaction and the reliable operation of the equipment.
|