Servo Controlled L.T. Automatic Voltage Controller (Stabilizer) | Servo Controlled H.T. Automatic Voltage Controller (Stabilizer) | HT Transformer with Built-in Voltage Stablizer | Rectifier Equipments | Ultra Isolation Transformer | Special Purpose Transformer

SERVO CONTROLLED L.T. AUTOMATIC VOLTAGE CONTROLLER (STABILIZER)

Introduction :: Description :: Who Needs a Stabilizer :: Payback Period :: Benefits : Application :: Comparision :: Advantages :: Quantitative Advantages :: Technical Specifications :: Suggestions for Industrial units having OLTC

Higher current produce higher losses in Electric motors which cause premature failure of winding.

These higher current of Electric motors also increase the losses of cables, Switches, Transformers & other associated equipment.

This higher current of Electric motors require 15-20% higher setting of over load relay to avoid frequent tripping of motors starter. Higher setting of over relays have very little safety margin against single phasing and over loading conditions.

With the installation of the stabilizer and maintaining 390/400 volts, the motor will operate smoothly drawing 15-20% lesser current and corresponding the relay setting can be reduced by 15-20%. In case single phasing occurs, the relay will trip in 40-50 seconds. The motor can withstand the high current for this period and will be safe. Also the relays, contactors, switchgears, etc. incorporated with the motor will be safe.

.

1. Linear, plus/minus type vertical Rolling Contact Voltage Regulator
   In our Regulator we are using heavy section of electrolytic rectangular copper strip instead of copper wire to minimize the losses & increase the effiency of equipment. We are also using self lubricating Carbon Roller assemblies instead of ordinary carbon brushes which offers more reliability and trouble free performance of the equipment.
   
       
   
   
2. Double Wound Buck/Boost type Series Transformer
   In our Buck/Boost transformer we are using CRGO lamination to minimize iron losses and coils of Buck/Boost Transformer are wound with heavy section of multi strips electrolytic copper to minimize copper losses for getting better efficiency of the equipment.
   
3. Electronic Control Circuit and meter panel
   GLOBE Automatic Voltage Controller consists of very simple electronic control circuit for monitoring and controlling voltage, repair & maintenance of which is very easy.
   
   The regulator and Buck/Boost transformer are oil cooled, housed in same or seperate sheet steel tanks. Radiators are provided for effective cooling. The coils of voltage regulator & Buck/Boost Transformers are vaccum impregnated and oven dried as per IS